Callback form
Name
Phone
Time to call
 
export@rudgormash.ru

Tel: +7(473) 244-70-12

News

 
15.05.2018
      Ahead of schedule today two magnetic separators PBM-P-90/250A have been discharged for the iron ore processing plant.     Separators were manufactured according to the technical order of the client and are notable for its increased induction (0,24Tsl). The separa
 
06.04.2018
      This spring and summer Rudgormash plans to realise a number of on-site technical visits called Rudgormash Rally to the mining and processing plants of Lipetsk, Voronezh, Belgorod and Kursk regions under a slogan “We belong together” (#МыВместе).     T
 
27.03.2018
The twin-brother of this massive machine has been working in Stoylensky quarry for over a year by now. There was plenty of time for us to make sure that our decision to cross over to this particular type of drilling rigs was right.   - This drilling rig arrived here in the beginning of the


 

News

06.02.2018

Modernization of the drilling equipment goes on. Another upgraded drilling rig is sent to its owner.

 

January 17, 2017 at Rudgormash we welcomed our customers for the acceptance of the drilling rig SBSH-250MNA-32 (serial number 1611) manufactured for Stoilensky mining and processing plant (MPP)

The technicians of Stoilensky MPP: the head of the drilling equipment shop Vyacheslav Zaitsev, the mechanic Sergay Bulgakov and the drilling section power engineer Dmitry Ivanenko came to see their new machine.

 

15179059481   15179059762

 

The drilling rig was manufactured according to Stoylenskiy technical specification. It weighs 90 tons. Version – HV (6000 V).

The main outstanding feature is the position of the oil cooler. It is now situated in the back part of the drilling rig. It is reinforced with the metal net to protect the cooler from drill cuttings.

 

The machine room had also undergone some changes. The positive pressure ventilation system was installed in the machine room to keep the key operating equipment in its perfect condition.

 

Based upon the requirements of our customers we modified the construction of the mast and the machine control system as well. The drives of ABB brand were installed on the drilling rig altogether with the new control system.

 

Of course, all the major parameters of the drilling rig had been preserved. The angle of drilling is 0-15-30 degrees, the nominal diameter is 245 mm. Dust supression type is wet.

 

The drill also has an operator’s cabin of the new type and an antivibration armchair with the two control panels on both of its sides.

 

Mr. Bulgakov mentioned: “We need a modern hi tech SBSH which will account well for itself” “And I think, we have made exactly what they expected” , - said the chief engineer Vladimir Glazunov

Printable version

  «MMC RUDGORMASH»
tel/fax +7 (473) 244-70-12
E-mail: export@rudgormash.ru