Callback form
Name
Phone
Time to call
 
export@rudgormash.ru

Tel: +7(473) 244-70-12

News

 
16.02.2017
      The drill sent for export was loaded on four railway platforms on February 15 and started its long way to the customer. SBSH-250MNA-32 drilling rig has been manufactured according to the customer’s confirmed technical specification (the TS). We remind you that every T
 
10.01.2017
 The autumn exhibition season of ITE Uzbekistan company completed with three international exhibitions “MiningWorld Uzbekistan”, “Machinery Central Asia” and “TransUzbekistan” that took place in 16-18 November, 2016. The exposition was located in two showroom
 
08.11.2016
    Rudgormash received visitors from PJSC “Stoylenskiy GOK” on October 25, 2016 who had come for preliminary acceptance of the drilling rig SBSH-250 that had been manufactured by that time and was being prepared for the shipment. The drilling rig fundamentally differs from


 

The drilling equipment

Drilling rig SBSH-160/200-40D with a diesel drive

Drilling rig SBSH-160/200-40D with a diesel drive
 
The machine serves to drill holes of diameter of 160-215 mm up to 40m deep by 5 rods in highly abrasive rocks.

 

Overall parameters

 

General working weight of the drill exceeds the feed force by more than 1,5 times. Composition of the main units on the drill allows to rationally arrange the weight so that the drill was stabilized during drilling and traveling on rough surfaces. Its design, component parts and materials used in production conform to the state standard GOST and international standards ISO.

Engine:  
Model and capacity ............. Cummins QSK19
Number of pistons............................................. 6
Piston diameter
...............................................159mm
Piston stroke......................................................159mm
Discharge power at 1800rpmin.................485kW
Max torque......................................9084Nm

 

 Technical characteristics of SBSH-160/200-40D (with diesel drive)

 
Version  With diesel drive 
Hole diameter, mm  160; 171; 215 
Rod length, m  8,5; 9,2 
Number of rods 
Depth of drilling, m  40 
System of dust suppression  wet 
Sypply voltage, V  --- 
Total power, kWt  485 
Motor power of rotation unit, kW  52 
Speed of lifting and lowering of the drill rod string, m/min  15/15 
Speed of drill rod delivery to the face, m/min.  0...3 
Compressor capacity, m3/min  25 
Drill rod rotation frequency, rpm.  0...140 
Power of the track drive, kWt  52 
Traveling speed, km/h  0 – 2,0 
Max. gradeability, angle degree (°)  12 
Mass, kg  50000 
Overal dimensions with the mast up, m
lenght
width
height 

11.5
6
13.3 
Overal dimensions with the mast down, m
lenght
width
height 

13.4
6
6.2 
 

 

A set of optional equipment for the drilling rig:

     

  • compressor units by JSC “NPO VNII Compressormash” or Atlas Copco

  • hydraulic equipment by Bosch Rexroth;

  • drilling rod of L – 9,5m;

  • rods of diameters: 146mm; 168mm; 180mm; 219mm;

  • dry system of dust suppression ;

  • centralized lubrication by Lincoln brand;

  • portable electric heating fan for heating the machine room;

  • on-board controller that gathers and analyzes drilling data and indicates the results on the board display. It is possible to set data through the keyboard and to have two-way communication with a dispatcher.


  «MMC RUDGORMASH»
tel/fax +7 (473) 244-70-12
E-mail: export@rudgormash.ru